HXGF series Shaft mounted gear reducer with hollow output shaft
Model selection table:
Ratio:13:1 and 20:1
After 300-hour operation, please change the oil, and flush the gear
uint with suitable detergents.
Please do not mix the mineral oil and synthetic oil.
1) All torque arms/fulcrums are plated to eliminate them being
rusted in use.
2) The shaft mounts have labyrinth sealing on the conveyor end and
input shaft end so that the oil seal is safe from contamination.
3) The front end of the shaft mount has a hub cover to protect the
front oil seal as well as moving part of the gearbox.
4) Input shaft front bearing is a roller bearing as it takes in
more radial load from the belt pressure.
5) Breather plugs are extended so that the dust does not clog the
6) All oil seals imported from Taiwan.
7) Our gear units now have higher load capacity as the gears have
8) All gears are case carburised to a casedepth and ground inhouse.
9) All gear units are machined on a CNC machining center so are
very accurate in alignment.
10) Finish of all gear units are far superior to any other brand
being sold out of India.
11) The shaft mounts are available with keyed hollow shafts or
hollow taper bores with taper clamps.
Company name: HENGFENGTAI PRECISION MACHINERY CO.,LTD
Founding year: 1991
Quantity of employees: 500 employees
Factory square: 50000 square meters
Main products: With gear reducer and gearbox products as leading,
extend to Electrolytic aluminum equipments, Mixing equipments,
Precision transmission equipments, Environmental protection
equipments and so on large machinery equipments.
Qualifications of quality: CE,ISO9001